davincisoprano1
Registered User
--------------------------------------------------------------------------------
Joined: Jul 2010
Posts: 63
Post Title: Heel inserts and waiting to hear back
Posted: 08-17-2010, 03:29 PM
I applied at my rink for a job, I interviewed on Friday, and have yet to hear back. They said I'd hear something by "early next week" as in yesterday, today, or tomorrow this week. I'm sitting on edge because I need a way to pay for lessons because I want to take them and my parents aren't going to help since I'm about to graduate college. I just want to know if I got the job. They've seen me at the rink almost EVERY DAY and they know I know how to skate and that I know about skates and skating, so I don't see how I wouldn't get the job, unless they wanted someone older than 22.
I also got myself some heel inserts today for my skates. I've realized in the last few weeks that my heels are lifting when I skate which is keeping me from getting enough power in my stroking because my boots aren't tight. (I've gained/lost/gained/lost weight in the last 8 years since I got my skates, I'm now back on the losing streak aiming to get to a healthy weight finally) The weight gain/weight loss has made my feet change size, so my skates were fit to someone who had size 8.5 feet, when now I have size 6.5... I can't buy new skates because I don't have the money to, and I don't want to buy a new pair only to have to get another pair when I've lost the weight for good. So, right now I'm giving myself to Christmas to lose 30 pounds before I talk to my parents again about getting new skates (mom said she'd look into them for christmas/my birthday).
In the meantime I have heel inserts for my skates which made a considerable difference in my skating. It was easier to push off because my skate didn't feel loose and they were fairly comfy. It was weird for the first few minutes because it felt like I had something under my foot (which I did) but it wasn't uncomfortable.
I'm hoping to start up lessons again sometime in the next two weeks, and I have a goal to do the Christmas show. It's the day after I graduate so I think it would be a good way to celebrate haha!
I guess this turned into kind of a novel, huh. Have you all found it helped you if you added orthotics into your skates?
Audryb
Registered User
--------------------------------------------------------------------------------
Joined: Mar 2008
Posts: 83
Posted: 08-17-2010, 09:02 PM
I have inserts under my heels, homemade insoles, and multiple layers of thin foam taped to the insides of my skates all around the heels and ankles. My biggest problem now is that the foam is starting to compress, so the skates are loosening up again. In my case, the fitting issues stem from this being my first pair of skates, which I bought from my rink's pro shop based on a measurement by someone who is by no means an expert. That and they only sell Jackson. Based on Jackson's measurement chart, the ball of my foot is a D or E width (and the length of my foot should put me in a 4 1/2) but I'm wearing size 5B. And the heels are way too wide. Unfortunately, I can't afford new boots right now, especially not customs, so I make do :-)
Query
Registered User
--------------------------------------------------------------------------------
Joined: Jun 2007
Posts: 821
Posted: 08-18-2010, 01:08 PM
I tried a number of things to modify the shape of my insoles and boots in general. Athletic tape (e.g., "coach's tape", etc.) does not compress much, and is essentially permanent if applied underneath the insole. It is also hypo-allergenic - as safe as they could make it to be near your skin. Some non-medical tapes, adhesives and foams may not be as safe.
But in other places inside your boot, like on the sides, you need something sticker like Moleskin, even if it gradually compresses. Like athletic tape, it is designed to be safe to have near your skin.
Audryb, If the heel is too loose, not only is the skate hard to control, but you may develop blisters. it isn't hard to fill in the spaces around your heel. To some extant you can do that from beneath the insole there. You can also make what I call "wings" - places where the tape extends (stick sides stuck to itself upwards from the insole, along side your foot. Or you can press Moleskin onto the leather in there, if you don't have a furry liner inside the boot.
I discuss making your own boot mods in my page, below. I think it has to be done by someone medical to be called an "orthotic", but the concepts are the same - it's all pretty obvious and easy to do, unless you have a non-obvious medical problem, so if you are good at figuring things out, you may not need a doctor, etc. to make you the equivalent of an orthotic.
davincisoprano1
Registered User
--------------------------------------------------------------------------------
Joined: Jul 2010
Posts: 63
Post Title: Two things
Posted: 08-18-2010, 02:43 PM
1) I GOT HIRED!!!!!!!!!
2) My boots aren't moving around as much, the Dr. Scholl's inserts definitely helped.
Audryb
Registered User
--------------------------------------------------------------------------------
Joined: Mar 2008
Posts: 83
Posted: 08-18-2010, 03:01 PM
Query, I've read lots and lots and lots of your comments on modifying boot fit, and have even taken some of your suggestions, such as making my own insoles to give myself a little more room width-wise in the front of my skate. However, I think it would take an entire roll, maybe more, of athletic tape in each skate to take up the kind of room we're talking about in my heels, and like you pointed out yourself, tape comes off the sides. Moleskin is also pretty thin, and it would be expensive to buy enough of it to fill in the space around my heels. The foam works, and if it ends up compressing, I'll just have to deal with redoing it occasionally.
Quote:
Originally Posted by Query
Audryb, If the heel is too loose, not only is the skate hard to control, but you may develop blisters. it isn't hard to fill in the spaces around your heel. To some extant you can do that from beneath the insole there. You can also make what I call "wings" - places where the tape extends (stick sides stuck to itself upwards from the insole, along side your foot. Or you can press Moleskin onto the leather in there, if you don't have a furry liner inside the boot.
d b n y
Registered User
--------------------------------------------------------------------------------
Joined: Jun 2002
Posts: 8168
Posted: 08-18-2010, 05:03 PM
Quote:
Originally Posted by davincisoprano1
1) i got hired!!!!!!!!!
2) my boots aren't moving around as much, the dr. Scholl's inserts definitely helped.
Happy to hear your quick fix for the boots helped.
CONGRATULATIONS on landing the job!
Query
Registered User
--------------------------------------------------------------------------------
Joined: Jun 2007
Posts: 821
Posted: 08-18-2010, 08:00 PM
Quote:
Originally Posted by Audryb
QHowever, I think it would take an entire roll, maybe more, of athletic tape...
Sounds like you've got what you want.
That's what counts.
JimStanmore
Registered User
--------------------------------------------------------------------------------
Joined: Nov 2009
Posts: 31
Posted: 08-18-2010, 11:01 PM
Congrats, davinci. I got an application Monday to be a skate guard. I still haven't turned it in yet because the job level is so different from what I normally do and it would mix my business life with my "other" life. But, hey, I want to be an instructor/coach in the not too distant future. I figure that I will get more ice time to work on basic stroking and crossovers without having to pay for it - I'd never spend an entire session on that even though I need to in order to catch up the 10 or 15 years of ice skills I am lacking.
Guess I'll go ahead and turn it in tomorrow. Thanks for motivating me!
Isk8NYC
Board Moderator
--------------------------------------------------------------------------------
Joined: Nov 2003
Posts: 9895
Posted: 08-18-2010, 11:41 PM
Congratulations on the job, davincisoprano1!
Query
Registered User
--------------------------------------------------------------------------------
Joined: Jun 2007
Posts: 821
Posted: 08-19-2010, 01:40 PM
Audryb: What type of foam works for you?
P.S.
http://www.jacksonskates.com/html/heat-mold.html#custom says Jackson does customs. And
http://www.jacksonultima.com/en/Publ...4D5E1A2B3C4D5E says you can custom order modifications of stock boots to get combination widths. I'm not clear how that affects costs. Of course it's too late now.
P.S. Start at Jackson's site map
http://www.jacksonskates.com/html/site.html. Click on "Prices and Ordering", the U.S. flag, the U.S. map, "Competitive Skaters", "Purchasing Information", "Customizing skate to Fit You". They say you can custom order modifications of stock boots to get combination widths. I'm not clear how that affects costs. Of course it's too late now. God only knows how they expect people to navigate their site, and figure out what modifications they offer. Really bad web design.
Audryb
Registered User
--------------------------------------------------------------------------------
Joined: Mar 2008
Posts: 83
Posted: 08-19-2010, 04:21 PM
Query, thanks for the info. I've been all over Jackson's site, and I agree it's not very intuitive to navigate. Also, like you said, it's too late. When I bought these I couldn't even skate backwards. I didn't know what I needed and at the time I thought they fit. When I buy my next pair, I'll go to a good fitter, even if I have to travel a good distance to do so, and I'll buy whatever brand works best for my feet. Jacksons in a split width might work, but I'm sure the Elite would be too stiff for me, so I'm guessing I'll end up in a different brand. For now though, I can't afford to buy new boots (and since my current boots are actually a little too long for me, I'm guessing it's likely I'll need new blades as well, and I really can't afford both!)
I used those brightly colored foam sheets you get at the craft store. They're about 1/16" thick, flexible, and easy to cut, squishy, but not too squishy, and only 99 cents for an 8x10 sheet. I use masking tape to attach them to the inside of the skate, which seems to stick better than athletic tape, but does still need to be maintained every so often.
Purple Sparkly
Registered User
--------------------------------------------------------------------------------
Joined: May 2010
Posts: 59
Posted: 08-19-2010, 05:53 PM
I attach make-up pads to the inside of my skate for the inside of my ankle. I keep them in place with duct tape. Yes, duct tape. I have more slippage on the left foot, so I also placed a sheet of moleskin over the duct tape. I think this adds just enough extra padding and doesn't slide as much as the duct tape. The make-up pads do tend to compress after a while of use, so I'll have to either replace the whole thing, or add another pad on top. Right now I have two pads in the left skate and one in the right. I really just need the pads to put an extra grip on my heel right where the little depression is.
aussieskater
Registered User
--------------------------------------------------------------------------------
Joined: Mar 2005
Posts: 731
Posted: 08-19-2010, 06:42 PM
Quote:
Originally Posted by Audryb
Jacksons in a split width might work, but I'm sure the Elite would be too stiff for me, so I'm guessing I'll end up in a different brand.
Another brand might well fit you better but just to let you know you don't have to start at Elite to get the custom E width in Jackson boots - I believe that can start at Competitor (or maybe even Freestyle).
(And yeah, their site is a nightmare to navigate. You think it'd be in their interests to make it a little more customer-friendly??)
Audryb
Registered User
--------------------------------------------------------------------------------
Joined: Mar 2008
Posts: 83
Posted: 08-19-2010, 07:52 PM
That is good to know, but can/ will they do a split width possibly 2 or 3 sizes different in the Competitor (or I guess the Premier is now the next model up from the Freestyle)? The ball of my foot is a D or E, but my heel is too narrow for the B I'm wearing now... I'm trying to resign myself to the fact that my next pair may very well be custom. But I will definitely check all options and make sure I'm fitted by an expert!
Quote:
just to let you know you don't have to start at Elite to get the custom E width in Jackson boots - I believe that can start at Competitor (or maybe even Freestyle)
Davincisoprano, congratulations on your job and sorry for semi-hijacking your thread!
aussieskater
Registered User
--------------------------------------------------------------------------------
Joined: Mar 2005
Posts: 731
Posted: 08-20-2010, 05:49 AM
Quote:
Originally Posted by Audryb
That is good to know, but can/ will they do a split width possibly 2 or 3 sizes different in the Competitor (or I guess the Premier is now the next model up from the Freestyle)? The ball of my foot is a D or E, but my heel is too narrow for the B I'm wearing now...
Yes they do - the ones I'm waiting for right now have been sized as B heel E ball. I eventually chose synchro boots as the poor man's version of their luscious-looking dance boot, but was told by the fitter that Jackson can split widths starting from Freestyle.
Not sure whether Freestyle will go past the D though - it may be that with the Freestyle, they will only split within their usual minimum and maximum width ranges (ie: A-D, so you could do as narrow as A heel, coupled with as wide as D ball). If your required size is outside their usual range, you would need to go to the Competitor or Premiere (= next one up from Competitor).
Even better, the split width doesn't cost the earth by comparison to the basic boot cost (which is astronomic if you're not in Canada/US!) As far as I can tell, they charge an extra $50 for one size split width.