21
The Pro Shop / Re: Uneven sole issues?
« Last post by Bill_S on March 23, 2024, 10:46:50 AM »Just FYI, It's easy to get reversed high/low edges along the blade length if the sharpening setup is off. This can happen if the sharpener's skate holder is adjusted high on one side and low on the other.
If a skate tech is not aware that this can happen, it's pretty much guaranteed to happen. It's one of the things that I check several times between passes as I sharpen a pair of blades.
EDIT: I should add that a blade bent along its length will also exhibit a combination of high vs. low edges on any given side. Check for bent blades with a straight-edge place against the side of the blade near the edges but below the chrome-relief grinding.
If a skate tech is not aware that this can happen, it's pretty much guaranteed to happen. It's one of the things that I check several times between passes as I sharpen a pair of blades.
EDIT: I should add that a blade bent along its length will also exhibit a combination of high vs. low edges on any given side. Check for bent blades with a straight-edge place against the side of the blade near the edges but below the chrome-relief grinding.